PCICASE GROUP

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
Home | Hot Products | About Us | Contact Us | FAQ | Downloads
   
Products


*Image for display purpose only, click to see the enlarged view.

Model: IPC-C3F 3U Chassis

IPC C3F is designed for entry-level applications where space is a concern, yet riser card or low-profile PCI requirements of 2U are not desirable. Up to 12" × 13" Extended ATX or SSI EEB 3.5 compliant motherboards are supported in this chassis.
Specifications

Model: IPC-C3F
Industry Standard: EIA-RS310D
Materials: Heavy-duty preplated SPGC cold-rolled steel
Finish: Front Panel : Black
Dimensions
(W × D × H)
mm: 482.6 × 670 × 133.4
inches: 19 × 26.4 × 5.25
Cooling: Middle : 3 × 80 × 25mm fans (+ optional 1 × 80 × 25mm fans or 
3 × 80 × 32mm fans for upgrade)
Rear : 2 × 60 × 25mm easy-swap fans (or 2 × 60 × 38mm fans for upgrade)
Power Supply: 500W~700W ATX/EPS single or redundant power supplies
Expansion: 7 × PCI slots (full height)
Controls: Power on/off, system reset and 2 × USB ports
Indicators: Power, LAN and HDD LEDs
System Board: Up to 12”(W) × 13”(D) E-ATX/SSI EEB 3.6 compliant MB
Drive Bay: External 5.25" 6
3.5" 1
Internal 3.5" HDD 1
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Gross Weight: 17.5 kgs / 38.5 lbs (w/o PSU & Rail)
Package Dimension:  (W × D × H):   mm: 585 × 860 × 312
Mounting Options: CLM-882054B-26: 26" Sliding Rails + Brackets
Backplane Module Options SNT-1041SS: 4×2.5" SAS & SATA HDD/SSD in 1×5.25" Bay, hot swappable.
SNT-1060SATA: 6×2.5" SATA HDD/SSD in 1×5.25" Bay, hot swappable.
SNT-2131SS: 3×2.5/3.5" SAS & SATA HDD/SSD in 2×5.25" Bay, hot swappable.
SNT-3141SS: 4×2.5/3.5" SAS & SATA HDD/SSD in 3×5.25" Bay, hot swappable.
SNT-3051SS: 5×2.5/3.5" SAS & SATA HDD/SSD in 3×5.25" Bay, hot swappable.
 
Home |  About Us |  Service |  Warranty |  Legal Disclaimer |  Terms and Conditions  |  Privacy
   
© Copyright 2003. PCICASE Group (Australia) Ltd. All Rights Reserved.