PCICASE GROUP

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
Home | Hot Products | About Us | Contact Us | FAQ | Downloads
   
Products
45" View | Front View | Open View | Top View | Rear View

Enlarge image

Model: IPC C2N 2U Chassis

IPC C2N chassis is designed for entry-level File Server and Network Attached Storage, where four mobile racks are provided. It supports a full range of processors form PIV to dual Xeon
Specifications

Model: IPC C2N
Dimensions (W × D × H) 19" × 2U × 575.4mm (22.7 inch deep)
Cooling: 2 × 80mm + 1 × 40mm fans
Power Supply: 400W single PSU
510W single PSU
500W 1+1 hot-swap redundant PFC
600W 1+1 hot-swap redundant PFC
Expansion: 3 × PCI slots via riser card (full height) or 7 × low profile PCI slots
Controls: Power on/off, system reset and 2 × USB ports
Indicators: Power, LAN, and HDD LEDs
System Board: Up to 12”(W) × 10.5”(D) ATX/SSI CEB compliant MB
Drive Bay: External 5.25" 4
3.5" 1
Internal 3.5" HDD 1
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Gross Weight: 13kgs / 28.6lbs (w/o PSU & Rail)
Package Dimension:   (W × D × H) mm: 579 × 761 × 242 mm
Mounting Options: CLM-882054B: 20" Slinding Rails + Bracket
CLM-882054B-26: 26" Slinding Rails + Bracket
GNS-1234RMK: 1234U rear mounting kit, 300mm depth
Backplane Module Options SNT-1041SS: 4×2.5" SAS & SATA HDD/SSD in 1×5.25" Bay, hot swappable.
SNT-1060SATA: 6×2.5" SATA HDD/SSD in 1×5.25" Bay, hot swappable.
SNT-2131SS: 3×2.5/3.5" SAS & SATA HDD/SSD in 2×5.25" Bay, hot swappable.
 
Home |  About Us |  Service |  Warranty |  Legal Disclaimer |  Terms and Conditions  |  Privacy
   
© Copyright 2003. PCICASE Group (Australia) Ltd. All Rights Reserved.