PCICASE GROUP

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
Home | Hot Products | About Us | Contact Us | FAQ | Downloads
   
Products
Features
  • Intel Bay Trail J1900 Quad core processor
  • Intel HD graphics and DriectX 11 support
  • Dual channel DDR3L with two connectors for MAX. 8GB memory
  • Dual independent display from HD-Out, VGA, and Embedded Display-Port* / LVDS connectivity
  • Features high speed Gigabit Ethernet connection
  • Features 2 SATA 3Gb/s
  • Two Hi-Speed USB3.0 ports support
  • Five USB2.0 ports support
  • One PCIe connector for the future Add-in card
  • Two PCI Express Mini Card connector for expansion card
  • 8 V to 19 V wide-range voltage input via back-panel DC jack or internal power connector

Specification
Form Factor Low-profile Mini-ITX (20 millimeters [0.79 inches] × 170.18 millimeters [6.7 inches] × 170.18 millimeters [6.7 inches])
Processor Chipset Intel Bay Trail J1900 Processor with integrated graphics (*Remark: Compatible with J1800 and J2900)
Memory
  • Support for dual channel DDR3L 1333/1600(runs at 1333 MHz) SO-DIMMs
  • Support for up to 8 GB of system memory on a single SO-DIMM (or 4 GB each by 2 SO-DIMM)
  • 204-pin DDR3L SO-DIMM
  • 2
    Graphics
  • Integrated graphics:
  • Digital displays (HD-Out)
  • Analog displays (VGA)
  • Internal flat panel displays:
  • LVDS
  • Embedded DisplayPort* eDP*
  • External graphics support via a PCI Express 1.0a x1 graphics add-in card connector
  • Audio
  • 2 + 2 Channel High Definition Audio ( HD Audio) using a Realtek* ALC888S audio codec supporting:
  • Analog stereo line-out (back panel jack)
  • In-chassis stereo speakers support (3 W/3 Ω via an internal header)
  • S/PDIF digital audio output (internal header)
  • DMIC digital microphone input (internal header)
  • Analog line-in (back panel jack)
  • Front panel HD Audio/AC’97 headphones/mic support (internal header)
  • 8-channel (7.1) HD Audio via the HD-Out interface
  • Expansion Capability
  • PCI Express 1.0a x1 add-in card connector Option: PCI Express 1.0a x4 add-in card connector by 2 lanes
  • 1
  • PCI Express Full-/Half-Mini Card slot
  • 1
  • PCI Express Half-Mini Card slot
  • 1
    Peripheral Interfaces
  • USB 2.0 front panel ports
  • 5
  • USB 3.0 back panel connectors (blue)
  • 2
  • USB 2.0 high-current/fast-charging ports (Yellow)
  • 2
  • SATA 3.0 Gb/s
  • 2
  • SATA 3.0 Gb/s port (multiplexed with an mSATA port, routed to the PCI Express Full-/Half-Mini Card slot)
  • 1
    Legacy I/O
  • Legacy I/O Controller (NCT6683D) that provides:
  • Hardware management support
  • Serial ports onboard headers
  • 2
  • Parallel port via an onboard header
  • 1
    LAN Support Realtek RTL8111G-CG Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs
    BIOS
  • BIOS resident in a Serial Peripheral Interface (SPI) Flash device
  • Support for Advanced Configuration and Power Interface (ACPI), and System Management BIOS (SMBIOS)
  • Hardware Management Nuvoton NCT6683D based subsystem, including:
  • Voltage sense to detect out of range power supply voltages
  • Thermal sense to detect out of range thermal values
  • 3-pin system fan header with speed control
  • Power Requirement
  • DC connectivity via back-panel DC jack(2.5mm/ ID, 5.5mm/ OD)
  • Internal 2 pin power connector
  • Environment
  • Operating Temperature: 0°C to +60°C
  • Storage Temperature: -20°C to +70°C
  • Safety
  • CE
  • FCC
  • UL
  •  
    Home |  About Us |  Service |  Warranty |  Legal Disclaimer |  Terms and Conditions  |  Privacy
       
    © Copyright 2003. PCICASE Group (Australia) Ltd. All Rights Reserved.